How to install Mercedes DAS - Xentry 7-8.2015

 Buy hard desk with the last version on eBay just 70$!

   This is the final DVD Release ' R2.0, V 07/2015, (2015-06-10)' DVD 1/3 . As of DVD 03-04/2015 we always need 3 DVD’s This is 07-08/2015 DVD 1/3 After finishing installation of DVD 1 / 3 you have to start manually the installation of DVD 2/3 DVD 2/3 ---------- This is the final DVD Release ' R2.0, V 07/2015, (2015-06-10)’ DVD 2/3 . This is DVD 07-08/2015 2/3 based on installed DVD 07-08/2015 DVD 1/3. After finishing installation of DVD 07-08/2015 DVD 1/3 you have to start manually the installation of this DVD 2/3. This DVD contains 0 additional DVD AddOns

Needed programs for the preparation of the installation files ,

If you are working with APPd 252-253:
Magic ISO Maker ; isd ; SID ; HxDSetupEN
You can download them from:
""https://mega.nz/#!iZIHWYKL!_lj8l2dgbnG96V7KEhugktGP7eQ0Ac-FrJMQihjfkMI"
all programs were tested and work
==========================
With the last three programs change the ' files 'INX", and  with "Magik Iso" 

replace changed files 
in the "ISO" installation.
Most errors in the installation ( 95% ) are obtained with incorrect 

replacement and save

  
Preparing your computer for new installation:
-----------------------------------------------------------

1)Install clean Windows XP-SP3.Create user Star

2)Install all necessary drivers. Separate disk :C-15-20gb.; D-8gb. ;

 E-55-60 gb. if you plan to install EPS with updates; F-min. 25gb.

3)Install the Virtual DVD and WINRAR

4)Run the file "WFPswitch" from the "NewGuide 2j-O" directory

5)Restart

6)Run one of the "prepare" batch files (252/253).

7)Restart

8)If you want to do an installation older than 12.2014 you need to change the 

date on your computer with the date 
1 month later than the date of relize 

9)Run "Starutilitis" and insert all the keys.Copy DVD1 and DVD2 in E;Wis.Copy

 DVD3 in C:Star

10)Mount DVD1 ISO in virtual CD - drive G

11)When it loads, open diretory "stardiag", copy folder 201412 and paste in

 E-( Wis )-for programs 
from 12.2014 to 07.2015

12) Run "Setup" in directory "stardiag".- then follow several restarts.

13) If all changes are successful after about 40-50 min a window, labeled

 "successfully installed DVD1"
 will appear ,then click Finish to restart.
Do not rush to press!! Minimize the window, go to the Start button, press 

and in the window that opens
 write "Regedit".Go to the: 
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run and delete

 "Fanmonitoring".
Then open the minimized window and click " Finish"
.
14) After restart, mount the DVD2 and continue installation

15) If everything is changed successfully ,after about 140-250 min. a window,

 labeled "successfully installed
 DVD2" will apear, then click Finish to restart.
Do not rush to press!!Repeat the same exercise you did after the end of

 the installation on DVD1.

16) Then go to "Control panel" and uninstall the antivirus program

17) When you have finished uninstalling, press "Finish" and restart

18) After restart,  mount the DVD3 and continue installation

19) After about 20-30 min. a window, labeled "successfully installed DVD3" 

will appear, then click Finish to restart.Do not rush to press!!

20)  Undo any changes that were made the trick "wbemtest", run "after

 installation" and then press "Finish".

21) Restart and begin the installation of updates on Windows.

22) Restart and, for the first time, charge the installed system

23) First, install is WIS Standalone and then EPS. Use the trick of Mr. Weryo

 to modify d2ksetup. ini file, 
which is located in C: d2ksetup. rc. 
It is necessary to install the WIS

24) 2xDVD's Images are required for full WIS/ASRA Version.

25) From the '1of2' or '1of1' Image (depends whether you install FULL 

or Updated Version...) run the SDSwitch.exe file,
 follow your Screen Instructions and wait with patience for the Installation to 

finish

26) After the Installation finishes. you are ready to run your WIS/ASRA 

from your Desktop Icon and then you can
 configure the Language that you prefer!

27) Click SDNK icon, which is located in the lower right side of the windows 

explorer. Go to configuration 
and select what you want there, 
WIS is in offline mode.

28) Congratulations ... you have installed system with WIS Standalone

29) Before and during the installation of the Xentry do not add and

remove any programs or patches. 
This leads to errors in the installation and you will need to start all over

 again. Any additional programs should
 be installed after the completion of the basic installation.

072015-Setup_org.txt Xentry Pics Fix (7.2015).rar

wallpaper_072015_rev4685.rar

DAS-XENTRY 07-08.2015 MEGA.rar

DAS_XENTRY 07-08.2015-Torrent.txt